This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
would like to ask if victron multiplus 12/800/35 is good for charging lifepo4 batteries? Till now I had agm batteries but i would like to change. 95% of the time I charge batteries from solar and an alternator (dc-dc charger from victron). But from time to time I plug in.
Many thanks!
as long as the setting are set to lithium it will work fine with lifepo4 batteries
But how do I set to lifepo4 on a victron multiplus 12/800/35? I know that i can set it on solar charge controller and on dc-dc charger, but i dont know how to do it on multiplus.
Thank you.
Open it up, click on the 3 bars at top left, choose demo library, pick your inverter charger.
Test drive the settings.
https://www.victronenergy.com/accessories/interface-mk3-usb
is this what I would need to set settings to lifepo4?
You could perhaps use a GX device (or a Raspi) to control stuff.
In all reality, you will initially need a Mk3 to update your multi, to a firmware version that a GX device can configure / control.
