Some background on my system: I have a 1995 Casita RV with the following power system:
1780 watt Canadian Solar bifacial solar array powering the following Victron components:
4x 12 volt LiFePo4 smart batteries,
1x Lynx Smart BMS,
2x Lynx Distributors,
1x Multiplus II 12V/3000 watt Inverter,
2x Bluesolar 150/70 Charge Controllers,
1x Cerbo GX/Cerbo Touch 50.
Now that I have my system online and charging (thank you Stefanie for the expert advice on the jumper wire :-)
Here's the new issue: The DC side of things works as it should, however, when I turn on the Multiplus II the system tosses out the following error:
VE Bus system (276) - low battery: alarm.
However, the battery bank is not anywhere near low - in fact, it is fully charged (see photos below).
I have tried clearing the alarm and re-initializing the inverter - and I continue to receive the same alarm...
Does anyone have any ideas on what may be going on with my system and how I should proceed to get the AC side of the system online and operational?