Hi Everyone,
I have battery: 160ah AGM with max load 45Ah.
And charging by 3 devices:
1. Victron multiplus compact 12/1600/70ah
2. MPPT smart 75/15ah
3. Orion-tr smart 12/12/30ah
Orion-tr and MultiPlus charger in general will not working in same time.
I read tons of documentation.
And I know that:
a) Smart Dongle for MultiPlus do not communicate via Network with other devices.
b) I will need separate temperature and voltage sensor for MultiPlus and MPPT / Orion-tr.
c) Orion-tr do not supported temp. sensor but could working via VE. Smart network.
d) Via Victron connect I could set max load for multiPlus.
e) I do not want to invest too much money to another extra devices.
Questions:
1. How to safely configure devices to run in parallel, bearing in mind the sensors and maximum current for the battery?
- I should use normal sensor for Multiplus.
- I should use bluetooth battery sensor and connect with Orion and MPPT.
- I should change max load for Multiplus into 30 Ah.
- And at the end I should configure the same parameters for charging like type battery, voltage etc…
2. Do I need smart dongle if I have external ammeter and will have basic parameters from other smart devices (Simple switch button is enough for me).
3. What else should I know?