I have 3 Mppt controllers with a Victron ET 112 Energy meter via a USB ac powered hub
using VE Direct to USB hub converters
as the GX has only one usb Port and one VE Direct port
the 1 Mppt goes direct to the VE Direct port
the Et112 and 2 x MPPT go via the USB powered hub into the USB port
every time the power fails ac in and comes on again i loose the 1 or 2 MPPT saying no device
if we reboot the GX device it shows up again
we dont want the expense of installing a full on Cerbo GX device
anybody have simalr issues it is very annoying having to reset all the time