question

rarehyde avatar image
rarehyde asked

ET112 and Multiplus 2 GX

Just about to install a Multiples 2 GX and planning on installing it in parallel. I already have a grid tied inverter and want to limit my feed it to the grid.

Planning on installing a ET112 meter and wondered if this can be plugged straight into the multiplus as its a GX model, rather than going via a cerboGX?

Multiplus-II
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Rob Duthie avatar image
Rob Duthie answered ·

Hi


Correct plugs into the USB port with an RS485 to USB adaptor.

Regards

Rob D

NZ

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pau1phi11ips avatar image pau1phi11ips commented ·

Yep, works with this one https://www.victronenergy.com/accessories/rs485-to-usb-interface

0 Likes 0 ·
rarehyde avatar image rarehyde commented ·
Thank you both.
0 Likes 0 ·
Show more comments
majcher avatar image
majcher answered ·

Hi Team,

I'm currently buying MP 2 GX.

Is there a way to connect 2x ET112 to MP 2GX?

BR

Robert


1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Duivert NL avatar image Duivert NL commented ·

hi yes you can,


one with Ve direct and one with usb connection

or 2 with usb connection with a powered usb hub

(victron usb to ve converter cable needed for each usb connection)


0 Likes 0 ·
majcher avatar image
majcher answered ·

@duivert :)

are you talking about simple active usb2.0 hub and RS485 to USB interface cable (pn ASS030572050)?

BR

Robert

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Duivert NL avatar image Duivert NL commented ·
yes! but use a good quality powered hub
0 Likes 0 ·