question

marco-lingua avatar image
marco-lingua asked

Doubts about DVCC

Hello everybody. I would like some clarifications on DVCC.

My system: Multiplus12 / 1600/70, Mppt 75/15, Mppt 100/20, BMV712, LiFePo4 Victron battery with VeBus BMS, all connected to CERBO GX

1) Can I activate DVCC and is it recommended to do so or not?

2) in the user manual I understand that it recommends not to activate SVS and STS, is that correct? Why? Or if I can activate them how do I configure them?

3) Other parameters that I can/should configure to make my system perform at its best?


Thanks in advance


DVCC
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Sorry to be so unhelpful. But there are two things here.

1 Activate DVCC if you need it and understand what it does.

2 Trust the manual.

0 Likes 0 ·
2 Answers
Alexandra avatar image
Alexandra answered ·

@Marco Lingua

In the DVCC manual there is a table in the introduction.

screenshot-20220308-232751.jpg

As @kevgermany mentioned, if you do not meet the requirements or understand then don't switch it on. Always follow the manual for setup

If you left DVCC off the bms would control the system charging anyway (it is the only function you turn on) as it is one of the main features of the unit.


screenshot-20220308-232751.jpg (112.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marco-lingua avatar image
marco-lingua answered ·

Thanks for your answers

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

DVCC chapter in GX manual