question

simonjc91 avatar image
simonjc91 asked

MPPT/DVCC output settings

Hi all.

I'm installing a victron off gird system in the next few weeks (5kva multi, 250/100, venus gx) and I have a question that has a couple people (and myself) stumped.

Say the mppt was set for 50A max output to suit the batteries

The batterys were at float and a load was switched on meaning the multi was drawing 80A.

Would DVCC allow the MPPT to ramp up to output 80A (if the amount of PV was available) so that the batterys didnt have to supply the extra 30A?


Cheers

MPPT ControllersVenus GX - VGXDVCC
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
porcini avatar image
porcini answered ·

Afaik unfortunately not yet. But I'm not 100% sure if this has already been changed.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

DVCC chapter in GX manual  

Additional resources still need to be added for this topic