I have two 120 panels mounted to the roof of my california, and have a victron 75/15.
The vendor supllied two Y connectors to connect the panels in parallel.
But i'm maybe thinking of connecting them in series, this will reduce the clutter on the roof with the bulky Y connectors.
I already used the victron calculator and it seems that both would work.
However it says something about the max. number of solar cells being 108 for a 12V system.
This means that victron uses 36 cells panels for it's calculations?
So the main question is, can I wire the panels in series?
This would mean 144 cells?
My panels have these specs:
Generatorleistung wp | 120 Wp |
Solarmodul - Zellentyp | monokristalline Solarzellen |
Solarmodul - Anzahl Zellen | 72 |
Systemspannung | 12 V |
Zellenwirkungsgrad | 18.43 % |
Modulspannung (VMP) | 20 V |
max. Strom (IMP) | 6 A |
Leerlaufspannung (VOC) | 24 V |
Kurzschlussstrom (ISC) | 6,48 A |
Max. Systemspannung | 200 V/DC |