question

Harry Kerrison avatar image
Harry Kerrison asked

not showing current IP67 12/25

Hi

my IP67 12/25 Smart charger is only displaying voltage when trying to charge my 2 x 120ah batteries. Current is displayed as 0.0A.


Harry



battery charging
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

Hi Harry.
Is there actually any current flowing into the battery? Are you able to check with an Ammeter?
Just one step to diagnose, if there is no current flowing then perhaps the Smart Charger is indeed faithfully reporting this.

0 Likes 0 ·
Show more comments
1 Answer
wkirby avatar image
wkirby answered ·

If it is cycling through the stages of charging then surely current must be flowing. It should be displaying the current in the App.
I'm afraid it seems possible that you have a duff unit.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic