question

J P avatar image
J P asked

Proper ground wiring with 2 MPPT 250/60 to Quattro

Hi all. I'm using 2 250/60 SCCs and am wondering about stacking ground wires. Right now. I have the grounds from the 2 connected and then a ground running from the second SCC to the ground terminal in the lower right of the Quattro. From the Quattro, I run a ground from the same terminal (lower right of the Quattro) to the Lynx Distributor. For ease of connections, I'm wondering if I can connect both the Quattro and second MPPT grounds to a junction stud and then run to the Lynx Distributor from that stud?


Thoughts?


Thx.

Grounding
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@J P

A lot of the way grounding is done has to do with local regulations and whether you are on grid off grid or are using a generator.

Wiring unlimited on numbered page 63-64 has some basics from this blog post.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Ground, earth and electrical safety


Additional resources still need to be added for this topic