question

Pat Davitt avatar image
Pat Davitt asked

Quattro 48/5000 Behavior of K-1 programmable relay used to turn on remote fan

I have setup an assistant to use the K-1 relay to turn on a remote fan 10 seconds after the Quattro's fan starts. The remote fan starts fine, but never seems to turn off. Do I need to add another assistant to the K-1 relay to turn off the fan when the Quattro's fan stops?

Thanks,

Pat

MultiPlus Quattro Inverter Charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
boekel avatar image
boekel answered ·

Yes, a programmable relay must have two assistants, one to switch on, and one to switch off again.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Pat Davitt avatar image Pat Davitt commented ·

Boekel,

Thanks for your timely response.

Pat

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic