question

jmangus avatar image
jmangus asked

Wind generator monitrting

Hello All ,

I have a victron system using a victron Cerbo Gx. I have a smart shunt in line with my house battery bank. I would like to monitor my wind generator. I was thinking of using a second smart shunt inline with the wind generator to do this.wile there are no guide lines to do this I think this should work, any thoughts?I have an Eclectic Energy D400 wind generator

SmartShunt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
bathnm avatar image
bathnm answered ·

Yes this works. Set the Smart Shunt inline with the wind generator in DC Monitor mode and set to Wind Gen. This is what it looks like in VenusOS...

1642882925309.pngimg-410e6a221b6a-1.jpeg


1642882925309.png (122.0 KiB)
img-410e6a221b6a-1.jpeg (240.1 KiB)
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·
Nice screenshots Mark


note that this needs v2.80, currently in beta. See v2.80~41 post I made just now, includes changelog and some details about this feature.

0 Likes 0 ·
Show more comments
gcarr avatar image gcarr commented ·
Curious how you got on with this as I am looking to do the same and get some data from the power created by the wind turbine. Thanks Garry
0 Likes 0 ·
hardy-tuner avatar image
hardy-tuner answered ·

additional shunts now in VRM available and in history logs also ?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.