Hello all,
I've been in solar for a good number of years but I am new to Victron and I love their gear already :-)
The attached SLD is for a 3.24kWp/28kWh off grid system with 7kVA genset.
I have used the EasySolar 5kVA model (MPPT 150/100)
The power system will be located in a shed which is 20m away from dwelling #3 and 35m away from dwelling #5. There will be MSB in the shed with feeders going to each dwelling.
The generator is Honda EU70 32A (petrol gene/inverter) with ATS. I also want to connect it with a bypass option.
Would appreciate any comments on my design. I am mainly looking for comments on the interface with the 28kWh Pylontech BESS, the transition from the EasySolar to the MSB and compatibility of the connections between the gene and the inverter and MSB.
Many thanks
Yariv