Hey
the relay of my GlobalLink 520 i can activate via VRM Portal.
Is it possible to activate this relay automatically?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hey
the relay of my GlobalLink 520 i can activate via VRM Portal.
Is it possible to activate this relay automatically?
No this is not possible at the moment. I will add it to the feature requests.
Hi
Has there been an update on this topic?
My power supply setup for my trail camera is based on a SmartSolar Charger MPPT 75/10 and a GlobalLink 520.
As soon as the power consumption exceeds about 200 mA, I know that the camera is active.
Based on these triggers, I like to power up a mobile router that enables the image upload from the camera to my FTP server.
As long as there is no activity, the mobile router should be turned off as energy saving is extremely important outdoors.
The below pictures show how the system 'breathes' through the days. If a mobile router is constantly turned on, the uptime of the camera trap system would be negatively affected.
Thanks,
Martin
Globalink Product page
Globalink Online Manual
Additional resources still need to be added for this topic
29 People are following this question.