question

dmq avatar image
dmq asked

[closed] Venus OS migrate to Venus OS large node-red

Dear all,

is it possible to migrate Venus OS to Venus OS Large on a compatible RPi without a whole new installation (fresh dd to sd card)?

I want to work with node-red.

If not, can I add a package-repository where node-red is included?

Thanks,

dmq

Venus OS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
dmq avatar image
dmq answered ·

It works by just following the steps in the wiki. But it is a reflash - my settings for my display etc. are not there anymore. So I have to set everything up again.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Sophie & Christian avatar image Sophie & Christian commented ·
Please, can you give the link of this wiki (just in case i do not read it up to now) ?

Thanks


0 Likes 0 ·
dmq avatar image
dmq answered ·

Just for reference. After migrating, the following cmd is needed to update package repo:

(in case of old: 2.73 -> v2.80~21-large-23)

/opt/victronenergy/swupdate-scripts/set-feed.sh candidate

Second hint:

just save /etc/pointercal to /data and restore it afterwards. GUI is up + running again.

Thanks for this great project + your efforts!

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Sophie & Christian avatar image Sophie & Christian commented ·
Please, can you detail a little more on these commands, for instance where did you find it, etc. Thanks a lot
0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic