Hi all
So my battery pack for my off grid setup (930amp 48v wet cell, made up of 24 x 2v) is due at the suppliers in the next few days and they will be making up the link cables.
I know the multiplus 2 48v/8000 is recommended and setup for 2 x 50mm2 for both positive and negative, however the battery supplier has said they normally supply packs with single 50mm2 link cables and the maximum link cables they can make up is 70mm2, they have also said due to the air tight sealing when the cables are attached they would not recommend doubling up the cables.
That leaves me with the issue of I will need to double up or beef up the main feed cable to the battery, but would the link cables between the cells be up to the job ?
Any help greatly appreciated.