DC Cut off when Battery Soc is below 25%

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

stricky asked Sep 16, '21

Hi,

i want to cut off my dc lines, when the soc of my pylontechs below 25% percent.

i want to connect a high current relais to relais 1 of my cerbo gx...

how can i do that ? Only with the generator start / stop function ? in my opinion, the menu for that is much overloaded ...

is there another chance to do that easily and maybe for relais 2 as well ?

regards

christian

cerbo gx Pylontech dc system

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-09-17T20:10:20Z

Alexandra answered · Sep 17, 2021 at 08:10 PM

Second relay is manual trigger only. The first is controlled by the generator start stop.

You could always use a battery protect to disconnect your DC loads.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.