Can I use the two BMS ports for two separate Pylontech banks and then connect a third bank of Pylontech for a third a bank on the CAN-bus? Will I still have full communication between battery and GX with normal operation?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
no - this is not possible.
To connect multiple Pylontech battery towers to your system, you will need the Pylontech lv hub.
What cable do you use for the communication between the hub and the cerbo. I have tried The victron cables (type B and Type A ) and zero comms.
I am using 18 US2000 and a LV hub
35 People are following this question.