replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

Idea

harold suggested Aug 27, '20

VRM overview of AC2OUT relay status

Hi,

Could the status of the relays, Quatro, be made visual on the VRM portal, especcially de AC2OUT relay will be very usefull.

And may be additional, add a possibility to switch the AC2OUT relay manually on the CCGX

Harold

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Trevor Bird commented · Jun 27, 2022 at 07:07 AM

In a similar way to do with AC2 it would be wonderful to reduce the time from generator start to AC2 available to less than two minutes. This sounds trivial but the implications are large. More than one prestige yacht manufacturer bypasses the Quattro because the delay is too long. The client thinks a fault is in the system. Start generator and two minutes still no power? It would be good to reduce this if the installer wishes. In some cases the delay is far too long. It is a real shame because it ruins a really good system for no apparent reason.

2 ·

harold commented Nov 16, '20

Still wish

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Warwick Bruce Chapman commented Nov 16, '20

Nice idea. Could be done pretty compactly.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold commented May 19, '21

Kick-up, for a new version?

;-)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ls-design commented Nov 15, '21

would be handy

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rmoosa commented Sep 5, '22

We have achieved this functionality using a combination of one of the built in relays on the cerbo and an assistant. We also control this via node-red.