The Cerbo GX Auto Gen Start software is in my view very nice indeed. It appears to have one thing missing. Most generators require a short period of low load to cool down prior to stopping so they don't stop on high load with no cooling. The auto gen start software simply shuts the generator down and if the generator is connected to a Quattro the Quattro disconnects when the generator voltage dissappears. It would be very beneficial if the Quattro could disconnect a couple of minutes prior to the generator stopping. That would be a really nice feature to add to the already very rich feature set of the Cerbo GX auto gen start software. If the Cerbo GX could command the Quattro via the VE BUS to disconnect the generator input at the appropriate time it would take some concern out of implementing the auto gen start feature.