question

armstead81 avatar image
armstead81 asked

IP65 charger and smart shunt

Hi,

I'm going to install an IP65 charger to my system because ad the moment I can't recharge the battery from Orion, we are in lockdown. The question is, do I need to connect the positive to the Victron lithium battery and the negative to the smart shunt or both to the battery? In which order or doesn't matter? Unfortunately, I can't drop the car at the auto electrician's and my 12v knowledge is about zero and I'm desperate.

chargerSmartShuntip65
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

Connect the positive of the IP65 to the battery positive. Then connect the IP65 negative to the "SYSTEM MINUS" terminal of the smart shunt.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Chargers.

Additional resources still need to be added for this topic

SmartShunt Product Page

SmartShunt Installation Manual

SmartShunt Quick Installation Guide

SmartShunt Datasheet

Additional resources still need to be added for this topic