question

sv-the-dream avatar image
sv-the-dream asked

BMV712 not reaching 100% SOC after software update

we’ve updated our BMV712 as requested by the app when replacing our batteries and while adjusting the settings and ever since the SOC never reaches 100% regardless of how many hours charging under solar or engine, lingering on 94-96%.


have confirmed all settings on MPPT, all battery connections. Manually synchronised the BMV after hours of batteries being in float mode under solar and engine and every day still doesn’t get to 100% SOC on the BMV712.


current firmware v4.05 on the battery monitor BMV-712 smart

current firmware v2.23 on the BMV-7xx Smart Bluetooth Interface


fear there may have been a glitch during the update. How can we revert the update and try again?

BMV Battery Monitorfirmware update
7 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Victron BMV battery monitors product page

Additional resources still need to be added for this topic