question

myren avatar image
myren asked

GX touch device not showing energy flow from batt to inverter

Hello guys.

The GX device is not showing energy flow to the inverter??

I am a experienced Victron builder, but have encountered this new problem.

Just finished a DC system for a customer ( AC inverter for the aircondition )

All devices in the system are updated to the latest firmware.

Inverter is connected via VE direct to the cerbo

1629881548159.png239806815-873065913643048-1115834244274761940-n.jpg240547648-547770976466415-6345725968779235199-n.jpg239368798-3121115454877812-5679378944591736732-n.jpg239621228-381910603641461-5837751088056111356-n.jpg


Yours sincerely,

Lasse Myrén
Technical supervisor

Gsol icon

(+45) 21771535

lmy@gsolenergy.com
www.gsolenergy.com

We support Sustainable Development Goal 7
Ensure access to affordable, reliable,
sustainable and modern energy for all.


cerbo gxVE.Direct
239621228-381910603641461-5837751088056111356-n.jpg (77.8 KiB)
239368798-3121115454877812-5679378944591736732-n.jpg (103.1 KiB)
239806815-873065913643048-1115834244274761940-n.jpg (106.0 KiB)
240547648-547770976466415-6345725968779235199-n.jpg (121.0 KiB)
1629881548159.png (46.7 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·
This has to be the prettiest install I have seen.
0 Likes 0 ·
Show more comments
0 Answers