Hello
Last night I installed Connect v5.48 beta on my SmartShunt and SmartSolar 100/20. This I did because I have been waiting for an update to allow long term trend monitoring.
I have two Poweroad LiFePO4 100ah batteries connected in parallel.
The SmartSolar float voltage is set at 14.20.
The batteries went to float mode this morning at about 1037.
The SmartSolar records the battery voltage at that time as 14.21 which ties in with the 14.2v set as float.
The maximum voltage recorded by the SmartShunt is about 13.45 and is at the same time. That value had been held for at least 15 minutes.
I don't understand why there is a difference.
The voltage shown on both devices around midday is the same at 13.2v.
The batteries themselves through Bluetooth show that same voltage and 100% state of charge.
Can anyone suggest why there is such a large disparity in voltage?
Thanks in anticipation...
Chris