question

skabalavayi avatar image
skabalavayi asked

Is it possible to control SmartSolar Charger MPPT 75/15 via VE.Direct zu VE.Can Interface ?

Hello community people,

I would like to know that if VE.Direct to VE.Can Interface or VE.Direct to NMEA2000 interface can be used to access the SmartSolar Charger MPPT 75/15 via CAN bus. It would be great to suggest any solution to control the charger with any of the interfaces.

Thanks in advance.

MPPT Controllers
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, and welcome to community!

That cable is not compatible with our solar chargers. See website: https://www.victronenergy.com/accessories/ve-direct-to-nmea2000-interface.

Is the control needed for a battery BMS? Then see our GX product range.

Except for that, we don’t offer a vedirect <-> canbus interface for your requirement.

And make sure you really need control, rather than just monitoring.




2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

skabalavayi avatar image skabalavayi commented ·

Hello,

Thank you very for your reply.

I would like to monitor the charge voltage, charge current, PV current, and PV voltage from MPPT solar charger. It would be great if you please let me know that how I can monitor those parameters for my own application via CAN bus.


0 Likes 0 ·
Show more comments