question

wysiwyg avatar image
wysiwyg asked

Does the dashboard view show actual Solar PV Wattage?

Dashboard showing a very low PV wattage, and its a clear sunny day.

Is this because the MPPT controller is throttling the energy input into the batteries?

Running a 48V system, AGM battery bank, Mppt 150/100


screen-shot-2021-08-03-at-105616-am.jpg

smart solar charging behaviourdashboard display
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

"Is this because the MPPT controller is throttling the energy input into the batteries? "

Yes, your mppt has moved into the Float charge state.

5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wysiwyg avatar image wysiwyg commented ·
Thanks, so is there a reason why Battery % reading 96% and not 100%
0 Likes 0 ·
klim8skeptic avatar image klim8skeptic ♦ wysiwyg commented ·
0 Likes 0 ·
wysiwyg avatar image wysiwyg klim8skeptic ♦ commented ·
Thanks, is there a way to display actual PV wattage before the mppt throttles the input wattage from the PV panels?
0 Likes 0 ·
klim8skeptic avatar image klim8skeptic ♦ wysiwyg commented ·

After the charger has changed states the best you can do is to look up the history in VRM advanced tab. PV watts going into the mppt is not available, however watts from the mppt to battery is. (and other stuff)

vrm-1.png

vrm-2.png


0 Likes 0 ·
vrm-1.png (97.0 KiB)
vrm-2.png (81.8 KiB)
Show more comments

Related Resources

Additional resources still need to be added for this topic