Hi all, getting ready to go boondocking in 6 days and it seems new panels are not registering in the App. I have two 100W HQST panels and the 75/15 SmartSolar Controller. I have connected the panels in both parallel and series and still see a ZERO watts being received in the solar section at the top of the app for the controller. In series, I see 37.5V in the solar section down below and 0.0A. I see the voltage levels change in the solar voltage area a little as do the battery levels - but still a big zero in the top solar section.
Is this because the batteries (two 12V bank) are fully charged? Shouldn't the app at least tell me how many watts the panels are producing regardless?