question

Mike Dorsett avatar image
Mike Dorsett asked

Pip3 missing from opkg list

Following the warning about the impending upgrade to python3 with 2.80, I upgraded a test system (2.72) with python 3. Fairly strait forward, apart from having to tweak some of the Victron packages. However, pip3 is missing from the python 3 install ( could do with a python3- group- install set too), and I ended up installing some modules using setup tools. Any Ideas as to when 2.8 will be available for testing?

Venus OS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
jeroen avatar image
jeroen answered ·

It is available in the testing feed since about the time of the message. You are warned though, the feeds is called testing for a purpose!

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mike Dorsett avatar image Mike Dorsett commented ·

Thanks Jeroen. However, I just ran opkg update, followed by opkg list and still don't see this:-

screenshot-from-2021-07-25-07-17-28.png

pip is there for python.

0 Likes 0 ·
Show more comments

Related Resources