question

s-signor avatar image
s-signor asked

Is the VE Bus V1.11 safe to install?

Is this firmware safe to install?

firmware update
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@s_signor@bellsouth.net


You may need to clarify what product you are installing the firmware on.

0 Likes 0 ·
Show more comments
1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

@Alexandra I guess he is referring to the VE.Bus smart dongle that had a bug in version 1.10 and was rolled back to 1.09.

@s_signor@bellsouth.net I can't test it right now but I don't think the same will happen twice in a row.

https://www.victronenergy.com/live/victronconnect:beta

VE.Bus Smart Dongle:
Add firmware to v1.11: (mandatory update upon connection)
- Fixed constant connection reset bug, introduced in V1.10, between dongle and inverter on MultiPlus/Quattro firmware versions before xxxx460
- Fixed MultiPlus/Quattro status briefly indicated FAULT immediately after firmware update or power cycle
- Add dongle status feedback during initialization and mode switch between secondary and primary mode.


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

s-signor avatar image s-signor commented ·
Yes you are correct. It is the VE Bus Smart Dongle that had the issue on V1.10 for the Multiplus 12/3k/120-50
0 Likes 0 ·