System:
Quattro 48/8000 (Firmware 478) with 8 x 220Ah Flooded Lead Acid batteries, 2 x 150/35 MPPT's, CCGX (Firmware 472).
ESS Set to Keep Batteries charged. DVCC disabled. So, I do not want to feed excess power into the grid, but I want the solar to follow the load profile during the day where possible, and only take shortfall from the grid. Batteries must stay fully charged, do not want to cycle them unless grid fails.
Problem, is that when I Disable DC MPPT feeding in, the Solar output from both MPPT's drops to zero. If I Enable Feeding in, the solar shoots up to max, and sometimes it does feed into the grid.