This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
As per the title above. I searched through the excellent Victron Wiring Unlimited guide and here in this forum, but couldn't find an answer.
Just to make it clearer, I say it's a ''dedicated" battery because it's completely separated from the vehicle's pre-existing battery system, and it's connected only to the Victron inverter (with separate 70mm2 cables) and to my PV charge controller.
Thanks in advance for your help.
What is the point if your inverter and inverter battery is separate from the RV electrical system?
The PV Charge Controller plus the inverter plus the separate battery bank they are connected to, constitute a separate system dedicated to 220VAC.
Now that (I hope) this is clarified, can we please get back to my original question? ;-)
It seems that the two of you agree that there is no real reason to connect the inverter battery negative to chassis in favour of keeping the two systems separate.
