question

entaran avatar image
entaran asked

VRM Portal update taking a long time after being disconnected for 7 months

I just (finally) ran an ethernet cable to the power shed and connected the CCGX to the internet. I have managed to go into the firmware updates via the web interface and updated to 2.72 which means the CCGX has internet access. I went into the VRM portal settings, changed the update frequency to 5 minutes and have connected it to my VRM Portal account.

Last update is 7 months ago. It's been a few hours now and it's got no idea what's going on.

Thoughts?victron1.pngvictron2.png


These two screenshots taken within a few seconds of eachother.

VRM
victron1.png (22.3 KiB)
victron2.png (33.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Entaran,

That first sync can take some time if the system hasn't been connected for a while.

I presume it has resolved itself now automatically, but let me know if it's still stuck.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

entaran avatar image entaran commented ·

Turns out you're completely right. It just took a few hours to upload and process all the saved logs or similar. It now has "5 minutes ago".

Pity there's literally nothing in the documentation about this.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic