question

johanr avatar image
johanr asked

What mppt to get?

Can you please assist on what size mppt controller I should get:

Solar panel specs

2x 120 w in parallel

Pm 120w per panel

Voc 24.2v

Isc 6.46a

Imp 6.07a

Temp coefficient Voc -0.33%/C

Temp coefficient Isc 0.06%/C

Normal operating cell temp -45 to 80C

Battery specs

13v 108ah lifepo4 lithium 1400wh

Float charge 13.6v


MPPT SmartSolarmppt charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Elimac avatar image
Elimac answered ·

A 75/15 will do. Choose lithium profile.

But keep in mind that you may need more pannels, depending or your load.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ingo avatar image Ingo commented ·
I wonder about that, rather use the Victron MPPT Calc spreadsheet to verify the best selection. The charge current will be clamped at 15A when using a 75/15. I would use a 100/30 to be on the safe side as you can get 23A out of it during peak conditions.
0 Likes 0 ·
Show more comments

Related Resources

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic