This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
SmartController 100/20; SmartShunt 100, 100ah Lifepo4 battery
Small portable system was fine yesterday, this morning, my Shunt quit reading charge current to the battery according to the app. Continues to read current draw and all other information.
Nothing had changed. Everything is in the exact state as 16 hours ago when it was working properly. What is the fix for this?
Bob
Hi there have you tried rebooting the phone and uninstall the app and reinstall maybe help fix the issue, if possible power down the shunt and reboot it see if that sorts I hope this helps a bit david
It was reluctant to appear for me the first time. I went through the 'check for firmware update' process and that made it appear. Check your serial cable too. I found that the shunt will drop data points from the stream if it can't determine them. Are you able to provide a DC circuit diagram?
