question

modian avatar image
modian asked

Cerbo Tank Sensors not present

A friend of mine has a Problem with bis tank level sensors. The connection issue is only on the 1st and 3rd connectors, on 2nd and 4th the sensors works fine but the same sensors doesn’t work on 1 and 3 connection.

Firmware is 2.72

Does anybody have an idea to this Issue?

cerbo gx
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image Paul B commented ·
were they working before on a prior fw version and if so what version



0 Likes 0 ·
Show more comments
1 Answer
Paul B avatar image
Paul B answered ·

Are all the analog inputs turned on under settings IO

then under the device have all the settings for 1st and 3rd been setup,

Some screen shots of ALL the settings would be of help

1625903810826.png

1625903335566.png


1625903335566.png (19.2 KiB)
1625903810826.png (11.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.