What is the current state of support for something like the SeeLevel II 709-RVC CAN bus tank monitor?
asked
Current state of RV-C tank monitors like SeeLevel II 709-RVC
No change in RVC status but Garnet does sell a NMEA2000 version of their 3-tank sensor system. It's not in the catalog so you need to contact Garnet directly to see if they'll sell you one.
The N2K version works with Venus v2.71 and newer. But with long internally generated tank names. My GuiMods truncates the tank names to 3 words making the display look better.
https://github.com/kwindrem/GuiMods
TankRepeater makes the N2K version work for Venus v2.66 and older:
https://github.com/kwindrem/TankRepeater
Thanks. Do you know if anyone is working on RV-C tank monitors? I already have a SeeLevel II 709-RVC, so I don’t want to just replace it if RV-C support is imminent.
@Kevin Windrem [@Victron] would it be possible in venusos or when guimods truncated the name an option to use a nickname since I have 1 fresh 2 grey and 2 black. I see all tanks in venusos but it's not intuitive which tanks are which
Unfortunately, substituting custom names gets kind of complicated. First, the identification from the driver needs to be unique. For your two gray tanks, are the names shown on the stock Venus OS tanks page the same or different? If they are the same, then I'd need to use something else like the instance ID which might change over time. It might even be based on order of discovery.
This is why I've been begging Victron to provide a custom name field for all such external devices. This is not an issue for local tanks but for those that come in externally, Victron's position is the external device should provide the custom name. (Tank capacity is also in this same category but SeeLevel RV-C does not provide it.)
There is a tank number based on where the tank sensor is in line of the chain. So my fresh is listed as fresh water 0, then my grey tank 1, black tank 2, grey tank 3, and black tank 4. Victron adds waste on the grey tank and sewage to the black tank. This makes the cerbo unable to show the tank number but vrm shows the entire description. I'll reach out to see level about it but I'd like to pull victron in on this. I can also send some screenshots when I get home to help visualize what I'm seeing.
[@Victron] any thoughts?
