I have two MultiPlus 3000 (one for each leg on the Trailer) which I normally monitor through the VE.Bus Smart Dongle (Bluetooth). They updated firmware over VE Connect on Saturday. Since the update, when I look at the Multiplus through VE Connect over Bluetooth the status is "fault" or "Unknown" and the AC input and AC output does not show any status on one of the two legs. Occasionally it will match the remote screen showing the proper charging state, but changes to fault seconds after loading. I cannot replicate the conditions to make it show the correct status. One leg works good and the other does not. Everything was working great before the updates. The Multiplus 3000 appears to be working fine but I can not monitor it or make any changes to it through the bluetooth. I have disconnected it from my Android Galaxy S10 and reconnected it with no results. I contacted the company I purchased the equipment from and they said Victron was working on a fix for the latest update and should be out soon. Need to find a fix for this please??