The online portal stopped updating at 09:44:41 today (last connection time). I have checked the router connection and all seems to be OK. Is there an issue with the Cloud at the moment?
asked
VRM remote console data has stopped updating about 4 hours ago
Hi Alexandervich, I have seen data inconsistencies (displayed values VRM) since this morning. It could be a problem on their database, or an issue with an updated version of the VRM.
Michel
I have accessed the GX via the direct WiFi and get the following error: #153 Connection Error, Temporary failure in name resolution. Any ideas what this means?! Pic below.
@alexandervich
It's still up. Try rebooting the GX from within. You could also enable that HTTPS, which works for me.
@alexandervich "failure in name resolution" = DNS issue. It could be a problem with your DNS provider (router) so the Cerbo GX is unable to connect to the server.
Reboot Cerbo GX to see if it works
Reboot your router
If still having the issue, try changing the DNS parameters to 8.8.8.8. or 8.8.4.4 which are google DNS servers.
Reboot both Cerbo & Router
Michel
I've seen this issue last 2 nights. If I go into the Cerbo and disable the wifi network, wait 30 seconds, and re-enable, it reconnects and catches up in VRM with no data lost.
So you have a Touch-50 installed?
Same problem with my Venux GX since last night. Nothing has changed in my setup and I don‘t have at the moment physical access to the device to reboot it. There is something going with Victron‘s service that is usually very reliable.
