This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The Multiplus 24/3000 immediately stopped working after I had synced the SOC on the BMV-700 by pressing the "+ -" keys in normal operation. Since then it does not do anything anymore.
A hint to solve this problem would be highly appreciated.
Thank you!
Having a very similar issue. Does your Multiplus turn any lights on?
Battery voltage is ok as measured at the inverter's terminals.
No light turns on.
Tomorrow I might know more I hope.
solved: most probably the remote switch cable went loose inside the display's box.
