Hello, I am new to installing Victron and I have a problem. I have to install a 12s li-ion battery type NCM (EV) (3.7Vx12 = 44.4V). With a Multiplus II 48-5000-70 and Cerbo GX. Only lifepo4 appears in Multiplus II. I have changed the alarm and cutoff values below 42V and 40V (after use the ESS assistant). The 45.5V battery gives a low battery failure. What I can be doing wrong? Does anyone have a data table (DOD, SOC, Bulk ...) Thank you very much for your attention.