question

marekp avatar image
marekp asked

lights on MPPT charger working in ESS

System is a 3phase on 5 MP-IIs with one EasySolar-II DX and additional SmartSolar MPPT 150/35.

Lights ( bulk/abs/float) on MPPT does not mach the lights on MP-II.

Does this matter?
screen-shot-2021-06-28-at-115157-am.png

screen-shot-2021-06-28-at-115125-am.png

ESSMPPT SmartSolar
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@MarekP

They will be externally controlled by the system. So it should not matter.

If they were using their own charge algorithm then you should see the different stages.

4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp avatar image marekp commented ·

@Alexandra

That what I was thinking, but why light are not indicating the same state on MP-II and MPPT? The MPPT lights should indicate the same charging method as MP-II if MPPT is externally controlled?

screen-shot-2021-06-28-at-50435-pm.png

0 Likes 0 ·
Show more comments

Related Resources

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic