This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, Is Venus GX compatible with the Multiplus Compact 12/1600/70?
I would like to remotely monitor the Compact unit, the batteries and (both manually and auto) start and stop the generator.
Is there a different product if the Venus GX is not compatible?
"I would like to remotely monitor the Compact unit, the batteries and (both manually and auto) start and stop the generator."
You have not mentioned what battery/bms, or what genset you are using.
The multi 12-1600-70 is a pretty blunt brick. Not too many inputs/outputs, even with a gx device.
Relying on the multi/gx/bms to be in sync and remotely available is not 100% reliable.
I have been off grid with an 12-1600-70, plus mppts. Twice I have had problems with the pv array. Had to be on site to rectify that. Once had he BMS drop out during a firmware update, my fault for not reading the "documents".
Even gensets need refueling and servicing.
Hi @thanasis ,
It is compatible, but in almost all circumstances it has now been superseded by the Cerbo GX and that should be used instead if the Venus GX hasn't already been acquired.
Hi
It is not a production solution but I have just Installed the multiplus 12/1600/70 in camper van to replace 3rd party inverter. I'm using raspberry pi 3b+ running venus os 2.71. Also Monitors (SmartSolar and BMV 712) Monitoring the multiplus using VE Bus to USB mk3. Can access it via WiFi on my phone, ipad, mac. Bluetooth/VictronConnect Also is linked to VRM via mobile modem - remote VEConfigure, firmware updates work treat. Installing similar in show trailer
Don't know if this is useful
Rgds
