Looking for a bit of advice. When using the spreadsheet it listed my config as "Accepted" but I'm concerned with the values on the higher temp voltage reading.
This is for a smaller RV setup so I'm limited to using 6 12v Grape Solar 180w panels connected to a 48v Lifepo4 bank. The spreadsheet is showing 50.4v as "Min PV voltage @ max. temp" but I'm not seeing that be acceptable to charge a nominal 48v bank consisting of 16 3.2v max charged cells (51.2v when max charged), let alone pushing a 56v-58v bulk absorption voltage.
Am I missing something or how is 50.4 "accepted"? Thanks for any assistance!