Right now changing 1980 Morgan 462 from Ferro resonant charger and converter with flooded batteries where the positive leads routed through a " 1-2-both-off " switch and each battery had Negative cables going to a bulkheaded mounted Buss bar of sorts. With 1-2-B-O switch supplying power to a similar bus bar on bulkhead for loads to attach to...
So trying to figure out where to add the smart shunt...How the multi should hook up to the DC side of the house as all I see is DC cables going to and from batteries and one trickle charger line out. I am using the 2 250A 8D as the house that is with both attached to the selector switch and to the ground. But see now Negative or positive out other than trickle charger so how do I get from the multi to the bus bar and track usage.... I do not have a 712 as pictured here, am planning for a CCGX as soon as I see if I have to add any other items between the Multi and the CCGX to be able to control and view the system.
So take a look at the pic and Help a brother out....I have no ego when it comes to electrical so feel free to laugh..LOL
But help also Please!