By looking at the terminals and instructions I am led to believe that you can feed the autotransformer single phase 240 and generate 120/240 split phase. However that is not the results we are getting. Defective unit or misunderstood ?!?
As you can see by the circled leads you see the following;
120v-0v-120v 240v-0v
By having connected single phase 240 we get the following;
On the terminal labeled 120v-0v-120v
phase to ground we get 240v-120v-0v
is it only possible to drop the voltage on a single phase? Victron seems to advertise that you can use this auto transformer off a 230v inverter to creat split phase 120/240 VS using two inverters. Victron 230v inverters are 240v phase to neutral/ground. Hence my confusion.
Thanks for your help.