This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Can anyone explain how the remote on/off switch on the Phoenix VE.Direct inverter interacts with Victron Connect control of the inverter.
Does the remote switch need to be in the on position to control the inverter from Victron Connect?
If the inverter is turned off from Victron Connect then the remote switch is turned off then back on again, will the inverter start or is it necessary to go to Victron Connect and turn it on there also?
I'll answer my own question so others have the answer:
Victron Connect allows on/off/eco control of the inverter.
The remote on/off input is a closure to turn on the inverter.
With the remote input open or the main switch off the inverter is completely off and Victron Connect will not see the inverter.
When closing the remote on/off input or turning the inverter on from the on/off/eco switch, the unit will power up regardless of the last state it received from Victron Connect. That is if Victron Connect turns off the inverter, then the remote on/off input opens, the inverter will power up when the remote on/off input closes again.
Thanks for GuiMods! Unfortunately, I am unable to enable Inverter Only mode with Phoenix 1200 inverter. Any way to remove the top left tile for AC input.
Where you able to change modes at all from the overview pages? That would be unexpected but good news. Last I heard, the was no Phoenix inverter info on the overview pages and the mode switch didn't work.
What else is working:
Power for AC out?
Voltage, current frequency for AC out?
The Phoenix inverter's modes are different than a Multi or Quatro: On/Off/Eco for the Phoenix inverter; On/Off/Charger Only/Inverter only for the Multi/Quatro. Unfortunately, they reuse the same numeric values. So Eco is probably the same value as Charger Only, but a totally different meaning.
