question

noa-kalama avatar image
noa-kalama asked

100/30 MPPT Charger and 2 180w Newpowa panels

Lately my app has been only showing ~200ish watts. Is one of my panels partially dead?

screenshot-20210618-154039.jpgscreenshot-20210618-155143.jpg

MPPT SmartSolar
screenshot-20210618-155143.jpg (279.2 KiB)
screenshot-20210618-154039.jpg (358.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mike Dorsett avatar image
Mike Dorsett answered ·

from the reading of your Max battery voltage, it looks like the battery is fully charged and can't absorb any more energy. This causes the charger to shut down, so the daily yield and max power levels drop accordingly. Try putting a big load on the battery - take about 0.5 - 1 kWh out, and see if the charge goes back up again.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image
klim8skeptic answered ·

Panel Vmp/Voc are low.

Rewire them in series.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

noa-kalama avatar image noa-kalama commented ·
They were reading higher before is what I don't get.
0 Likes 0 ·
Show more comments