Will the MPPT 75/15 turn off the load during equalization or can it be programmed to? I have some IP cameras that might be affected as equalization voltage is just above their operating range.
asked
MPPT 15/75 equalization and load
It can be programmed. Have a look at the Victron Connect App. It has a Demo mode for all devices available
I see where you can set an equalization schedule etc but how to do tell it to turn the load off during equalization?
Thanks
You set the voltages in a custom algorithm. EQualization is over 14.4 V so you make it on >say 11.5V <14.4V
It is under load in the preferences
Thanks, I didn't click on the user.def1 before.
