I installed the BMV 712 yesterday for the first time to a 100Ah Lithium battery. The monitor worked great and displayed 13.5 volts for the last two days. I also installed the smart solar MPPT 75/15 and everything was working fine.
Tight I noticed there was no power on the monitor. When I checked my battery with a meter it said 1.9 volts. When I shut off my master switch the battery read 13 at the battery so it’s not that. Could the BMV be faulty?
All the connections are the same and there are no loads on the system. The only thing attached is the Victron SmartSolar MPPT 75/15.