question

markus avatar image
markus asked

#116 Lost Calibration Data on my BlueSolar MPPT 150/35

Hi,

I didn't have a look at the MPPT history screen for a very long time, but recently I spotted this:

Manual only says: This error will not auto-reset.

The charger is working without noticeable problems though. So what does this mean and why does it occur?

Thanks,

Markus

MPPT Controllerserror
bildschirmfoto-2019-02-22-um-103433.png (49.3 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

Maybe we have chargers from the same batch. My serial number is HQ1546xxx (end of 2015). I have #116 error too and another error, but it's a bit embarrassing to talk about the other error :-[

0 Likes 0 ·
1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hey Markus!

You found a known issue. A few batches (quite a while ago; this is not a recently produced Solar Charger, or is it?) weren’t properly reset before leaving the factory.

In more detail:


In the process in the factory; it starts uncalibrated (ofcourse) and then that error is recorded and was not reset in those batches.


Nothing to worry about.


Matthijs

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

Hi, thank you!

Yes, this is an older unit. Produced in Week 3 Year 16 .

It is absolutely possible, that this message was there from day one.


Errors, that I don't have to care about, are my favorite ones. :o)


Best Regards,

0 Likes 0 ·

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic